subject: Home Mole Removal Guide [print this page] Don't do this at home!!Don't do this at home!!
If you are concerned about something on your skin, or simply want a blemish removed please see your doctor!!!!
Following is simply a description of what i have been doing to my own body.
The information is simply a demonstration of my efforts.
How to get rid of moles
There are many different ways you could try to remove an unwanted mole, such as:
Natural Remedies:
* Apple Juice
* Baking Soda and Caster oil
* Onion Juice
* Dandelions
Over the counter Treatments:
* Herbal Treatments
* Mineral Salts
Cosmetic Surgery
* cut off surgically
* burnt off
* frozen off
* laser
However when it came to removing ugly moles/sun spots from my body i decided to use my own method of removal:
Burning off Moles with a Soldering iron:
Items:
* Soldering iron-Clean/Sterile, ensure it has a small tip as large tipped soldering irons may cause damage to surrounding skin.
* Alcohol wipes
I must however state that the moles/spots i chose to remove appeared 'normal' in that they were not irregular in shape or colour and what i considered to be risk free of being cancerous.
Obviously, anything that appeared odd i would leave and have it looked at by a specialist.
I must state again that i am in no way suggesting that anyone else do what i do, i am not a specialist in this field and would recommend seeing a specialist before treating anything on your skin.
Procedure:
For the initial removal i will post here i used an assistant as it was on my head, and i obviously needed help to remove blemishes from my head/back/back of legs etc.
-Ensure the soldering iron is clean by using cloth/tissue soaked in antiseptic, steel wool may even be used if the tip has some old residue built up on it.
If the iron was too dirty i would then consider replacing it with a new one.
-Switch on soldering iron allowing it to warm up.
Place it on a heat resistant surface when not in use, eg i use a plate or saucer.
On this occasion i chose to remove a mole from my head:
-Ensure plenty of antiseptic wipes on hand, don't use tissue or toilet paper as some may be left on the wound.
-Wipe the area to be treated with an antiseptic wipe.
-Now all i was doing was removing the mole/ freckle/sun spot which is basically on the surface of the skin or just under the surface, so i did not have to go too deep.
-What i simply did was give a few light taps to the mole.
The mole or surface of the skin kind of melts/shrivels away with the heat.
-This was only very fast and light taps on the skin, just to transfer some heat into the skin, if i was to hold the iron on the skin too long it would become quite painful and i guess could do some significant damage and cause significant scarring.
-Usually after a few taps 3-5 i would simply give the skin a wipe with the alcohol wipes and usually the top layer of skin would come off and generally the mole with it.
If a mole was not removed after around 10 taps, i would simply leave it as i considered it too deep to remove.
I would then clean the area and leave it to heal over the next 1-2 weeks, ensuring to keep the area clean as it healed.
-What i discovered many times was that even if the mole was not removed and i considered it too deep, as the scab fell off the entire mole would be removed.
I believe the heating process kind of killed the mole or in fact the scab that formed 'suffocated' the mole and it would then be removed with the scab.
