subject: How To Repair Lcd Monitor [print this page] If your LCD monitor has stopped working, and you want to save two hundred dollars, you should consider to repair the monitor you. Chances are that the thing with her pain is two bad capacitor. These small pieces resemble boxes of soft drinks thumbnails. When they spoil, vertices distendre you can easily tell which are bad. They are same, very easy to remove. Everything that you need are a firearm weld cab radio.
The only thing that stops you watch them, take the LCD direct separately! When assembled at the factory LCD trainers, they are not designed to be easily dismantled. It takes a bit of courage to separate the front of the rear. About the only tool you will need to work a knife of mastic is. A small, perhaps 1 / 2 inch important. Updated tools plastic as a resumption of work plays as well. Can less plastic plastic scratch tools.
The first step sees fabric and sees if the person has already proved a guide to take your LCD model separately. Often, someone has already done the work and they have demonstrated the instructions for you. It makes the work much easier. If you cannot find the instructions, you are!
Turn the monitor on his face and remove the database. It normally four ya screws which is based on the back of the LCD monitor. After you have removed the database, examine the back of the LCD monitor for all other screws. There are often two to four screw more results back the front bevel. Also delete them. After having removed all screws, gather, monitor it reversed with screen that meets far from you. It is best to start at the bottom of the LCD, this path instructor if you made errors from beginner "their use is therefore visible."
Insert the mastic knife between two half and start fouiner. Drag him to roughly as the bevel before 1 / 8-1 / 4 inch. You do not also anxious about broken plastic, it is harder than you think, and you will need to use some force to get the job done. Remember, monitor moves to the trash, or the good will in all cases if you do not have the fix, so you don't have very much to be detached.
Work your way through the background, after the bottom is divided into two separate, start working on the sides. After the sides are finished, move to the top of the LCD instructor. Be careful when you separate half it ya often a cable that connects Ribbon control an LCD instructor and you don't want to damage the ribbon cable.
Once you have separates it two separately in two, the rest of the work is a bang. Remove Housing Committee metal circuit. It generally requires the removal of several other screw. You are able to remove the screws the fate which take the DVI and VGA Stoppers also, but it varies direct monitor.
