subject: Cone Crusher Used As Tertiary Cruher In A Crushing Circuit [print this page] A cone crusher is generally used as a secondary crusher in a crushing circuit. Pre-crushed product (usually 3in minus depending on the cone crusher model
hydraulic cone crusher adopting world advanced technology is designed and made through to be the crusher of world advanced level. it is widely used in metallurgical, architectural, water and electricity, traffic, chemical, architectural material industries. It is suitable for crushing varies of mid hard and above mid hard ores and rocks.
Cone Crusher is one of the main types of primary crushers in a mine or ore processing plant. Gyratory cone crushers are designated in size either by the gape and mantle diameter or by the size of the receiving opening. Gyratory cone crushers can be used for primary or secondary crushing. The crushing action is caused by the closing of the gap between the mantle line (movable) mounted on the central vertical spindle and the concave liners (fixed) mounted on the main frame of the crusher. The gap is opened and closed by an eccentric on the bottom of the spindle that causes the central vertical spindle to gyrate. The vertical spindle is free to rotate around its own axis. The crusher illustrated is a short-shaft suspended spindle type, meaning that the main shaft is suspended at the top and that the eccentric is mounted above the gear. The short-shaft design has superceded the long-shaft design in which the eccentric is mounted below the gear
With advantages of reliable construction, high prod activity, easy adjustment and low cost in operation, SBM cone crusher is suitable for crushing various of mid-hard and above mid-hard ores and rocks. The spring release system of SBM cone crusher acts an overload protection system that allows chunk to pass through the crushing chamber without damage to the crusher, two kinds of sealed formation dry oil and water are used. It separates plaster stone and engine oil, reliable performance ensured.
