subject: How To Change A Kitchen Island Top [print this page] Show romanization Show romanization
Challenge Project vAlthough moderate do-it-yourself, you can change the head of the kitchen island with a little know-how, time and tools and some patience. Can have a focal point of the island and spine station in your kitchen. Important that top kitchen island is still in great working condition. It's a great idea, too, when planning a renovation of the kitchen that you must make sure all kitchen counter tops match. Here are tips to change a kitchen island to the top of one sheet.
Materials needed:
* Measuring tape
* Hammer
* Pry bar
* Kraft paper
Authority * digging with a screwdriver bit
* View Hull
* Razor knife
* Level
* Charges
* "L" brackets
* Wood screws (1/2-inch)
* Panorama
* Putty
* Putty knife
* Block
* Masking tape
Step 1 - Setup
Before removing old, worn out kitchen top island, take accurate measurements to determine the size of a new replacement before they buy. Be sure to remove all healthy and on top of the island - banks, taps, pipe joints and plumbing appliances. Closure of the water first. You will need to disconnect any electrical current to the island of the private sector. First turn off the power to control panel or circuit breaker. A good tip is to put a piece of masking tape over the shift in the position to alert anyone that does not run while you are changing the top of the kitchen island. In fact, declare that all members of the family and guests that you have the power of the work to change the top kitchen island.
Step 2 - follow the opening of the laundry
Tracking open sink, using a piece of craft paper and pencil, to provide a model for the new island kitchen top.
Step 3 - Remove the top of the old anti-
Remove the top kitchen island with a capacity under the old framework of the island. If there is [backsplash] against the wall next door, remove it carefully too. Also, use a knife to cut the barbed wire carefully away from any dam.
New countertop step 4 - Place
Place the new countertop on the kitchen window to make sure that the island level. If necessary, use wood shims to get the appropriate settlement.
Step 5 - Securing Top
Secure a new kitchen island higher than under by attached to the frame with the "bracketed" L and bolts of wood. Do not use the old devices and new drilling, so is the provision of the highest securely.
Step 6 - Cut a hole sink
Use the template that made from the top of the old and put it on the summit where you want to put in place. On the occasion of a new peak for the establishment of the line items. To make opening a sink, use the first hole saw to cut through the top and then jigsaw to remove the rest.
Step 8 - putty on the edges
Use plumber putty with a putty knife, spread seed around the edge of the hole and place the tub. Now, restart all connections and make sure all the plumbing and fixtures tight.
Step 9 - Attach a new backsplash
Attach a new backsplash, if necessary, run the bead fills between him and the wall.
Shop online for great bargains on top kitchen island. Manufacturers and distributors sometimes offer discounts for large purchases over the Internet.
