subject: How To Build A Tree House? [print this page] How to build a tree house How to build a tree house
A tree house can be a wonderful way to get extra play area for children or can even be used as an entertaining area for adults in some instances. The appearance of your tree house may be altered to suit either objective. Your main goal should be to achieve durability, stability and then comeliness. Once you utilize the right materials your child's tiny space to himself or your nature lover's leisure spot can be crafted to suit your needs adequately. When you have made your sturdy structure, you may put in a few lasting touches to make it even more inviting. Essentially this should become an outdoor retreat that may very well last you a few decades or more once it is maintained effectively. Finding the right plan and the best tree will be the first two elements you should decide on before starting this project. You will also encounter more success if you obtain the assistance of a few friends. You can have great fun starting and completing this project and you will certainly see your triumph in full bloom once the tree house has been completed for use.
Required Materials
Lumber
Galvanized Screws
Concrete (cement, sand and gravel)
Gravel Base
Clamp
Required Tools
Jigsaw
Hammer
Post-hole digger
Drill
Level
Instructions
1.To start get your second frame board and position it. Then brace it for extra support. Then you will have to drop a plum bob from the board to the ground this will become the area where you will place the first post hole. Make a mark at this area and then use a post-hole digger or shovel/spade if you do not have a digger and create a hole of 2 feet in depth. If you go a little deeper that will be okay, however, be certain that enough of your post will be available to attach to your tree house structure.
2.You can now pour the gravel base into the hole; this should take up no more than 3-4 inches of the hole. Put your 4 by 4 post into the newly filled hole and use a post level to make certain the post is adequately vertical. After doing this re-enforce your post by clamping it to the frame board, this will prevent it from swaying.
3.To secure your post further you will now need to put in your concrete mixture around the post hole. Put a bit of water on top of the mixture to prevent air bubbles from forming. Your post will be stable after it has dried properly. Repeat this process for the other two posts.
4.Erect the other two frame boards to finish your base structure. Put a few galvanized screws into the corners to make sure that they are secured properly.
5.Drill your posts and frames and then put in the carriage bolts securely. Put on your washer and nut and then re-enforce the two with a regular socket wrench to prevent shifting. You will need to cut the tops of the posts so that they will be evenly in line with the top of the frame. You can utilize your jigsaw to get a better cut. You can use a level to ensure that your cuts are level on top.
6.Create your ladder using your two by fours. Cut them to suit the section, making both rails and rungs. Nail them or screw them in place depending on the surface and your actual preference.
7.Now you are ready to lay your planks on top of your base structure. Ensure you leave spaces in between each piece of lumber. Nail them down properly.
8.Then create your wall frames using four by fours and wall studs. Place the frames around your platform and screw them securely in place.
9.Use a few pickets around your wall frame to permitadditional soundness to your structure. Re-enforce these will screws and a nail gun.
10.Your tree house is now ready to be painted and finished as you so desire.
Tip
Before construction examine the tree carefully. Have an expert assess it to make sure there is no damage that you may have missed. The tree has to be healthy and apt to support the bulk of your tree house.
