subject: Steps To Build Perpetual Magnet Generator: [print this page] A magnetic generator can be very helpful if you are planning to go green and want to generate clean energy. The following are the steps that will help you build a perpetual magnet generator.
Step 1: On a leaning axis, set a wheel, which will comprise the inner wheel. You will need a non-conductive wheel and which has a tendency to spin.
Step 2: Once you finish setting up the wheels, you now need to put some kind of magnets on the top of the edge of the wheel. For this, you need to use the ceramic bar magnets as they function well in this area. One thing you need to be careful about is to see that the magnets face in the outward direction so that they have the same kind of polarity.
Step3: In this step, on the inner ring, you will have to place a fixed outer ring. Here also you need to use non-conductive ring.
Step 4: In this step, you need to put magnets facing inwards to the outer ring of the magnetic generator
Step 5: Now see to it that the inner ring of the perpetual magnetic generator that you have built spin. The magnets on the outer ring should cause a perpetual spinning of the magnets until the other set of magnets face each other all over again, but all this should take place when the inner wheel attains the extreme portion in the process of its revolution.
Step 6: This is the last step where you need to look whether the inner ring spins so that the speed increases to a high levels, which in turn will generate energy.
If you follow the above-mentioned steps, you will be easily able to build a perpetual magnet generator and play your part in driving the world towards the path of sustainable development.
