subject: Install A Kitchen Pass Through [print this page] By Murray Anderson By Murray Anderson
Addition of a kitchen pass that would open the doors closed spaces and to allow light to flow between the rooms. It will make your home more livable, in addition to the post of your rooms, and to ensure that the left does not feel anything while they are working in the kitchen because the cook can visit with family and guests while preparing for dinner.
Kitchen pass through a hole in the wall between the kitchen and dining room or living room either. It is, in essence, opening a large window where a pass is often a counter in the high bar "" (about 42 "). On the kitchen, and there is often a counter in the lower height, where you can put food in your stomach before it is passed from through.
Width of the passageway through is usually determined by the planning for the cabinets, counters and equipment in the kitchen, as well as furniture in the dining room. It can be small pass across a wide range such as "16 (literally fit between the studs in the wall), all the way up to 6 feet or more, and is usually higher than 12" to 15 "from the ceiling, but are there any fixed rules quickly.
Installing kitchen pass through
Installation of kitchen traffic and relatively clear, but it can get pretty chaotic, because you have to cut and remove some of the drywall. Gets more complicated and the process if there are any counters or cabinets that are in place. Since the passage must be accessible from both sides, any trade list needs is likely to be arranged.
You'll also need to consider how you plan to deal with any plumbing or electrical wiring in the wall, respectively. Each case is unique, but often they do not turn into a big problem since the passes through the opening to the well above-ground wires and pipes are usually lower in the bottom of the walls. However, if you know there are wires or pipes, you will need to be more cautious when it comes time to open the wall and install the pass. Also, if you think you may be a bearing wall and the wall, arc temporarily reaches the ceiling before removing any of the buttons.
Install the reality and go through involving the removal of the existing drywall, and dispensing with the buttons, and install the box within a new framework is created to surround the hole. Box consists in the fact of the buttons "Jack" at the ends / sides to open up - boyfriend Jack is a nail attached to the second bolt list - in addition to a new header at the top and the base / plate on the threshold of the bottom of the opening. In addition to providing a framework for the pass, and Jack studs will also provide support to the head.
Make sure that you create a opening large enough that you have a room to install jack studs at each end of Fatah, and long enough that the head could rest directly on top of them. Should be top of the same piece of 2.1 "sandwiched between two plywood 2x6 to provide structural strength, as it now supports the weight of the roof.
The use of exchange drywall saw to cut the list and remove sections of the middle of the wall of the buttons at the opening. Install and attach the buttons jack, and headphone jack rest on the buttons, and attach it to the top of the remaining studs. Located at the bottom of the plate and attached to the studs Jack in the end, and the remaining portions of the bottom of the wall studs.
Once you have language in place, and finish installing the new drywall on the walls and on the pass through the opening. You can choose to put the cover on the open or simply to paint the walls the game - the choice is yours.
Once the pass is in place, you'll have plenty of options. Depending on your lifestyle, you can use the pass through the bar, restaurant, snack bar, or just pass "through" from the kitchen. Countertop types and colors of the walls and finishes are completely up to your imagination.
