5 Safety Practices To Avoid Falls During Roof Construction

Occupational injuries incurred such as when working on the roof can be avoided through

the following safety measures: assess strength and stability of ladder, secure a safety harness, procure scaffoldings, add safety net system, and install a warning line.

Several construction-related accidents happen due to absence of safety measures. Some sustain disabilities while, others are unlucky to deserve untimely death. However, this could have been averted if only preventive measures were undertaken. Here are some things that you can do to stay away from untoward incidents such as:

Assess strength and stability of ladder

Before using a ladder, make sure you have inspected its parts from top to bottom. Check for cracks, breaks, or slack portion so that nobody will get hurt. Secure both ends of the ladder or have somebody to hold it firmly on the ground. Ask somebody to pass whatever you need on the roof instead of bringing it with you while climbing. Another important thing to look into is the proper way of using a ladder, which is "facing towards" both when ascending and descending.

Secure a safety harness

Normally, this safety equipment comes in a kit that includes a harness, rope, roof anchors, and more. Ideally, it should be sturdy enough to support up as much as 5,000 pounds. To start with, pin down the anchor in such a way that is secured as near as the peak most portion of the roof. From there, loop the strap thoroughly in place. Always remember to follow the manufacturer's instructions carefully to avoid freak accidents. Make sure that you can easily adjust the rope in case it becomes slack as you move around.

Procure scaffoldings

Although, this affects the budget a bit, but making use of a platform made of galvanized steel can greatly lessen the chance of sustaining occupational-related injuries. It has frames to support the structure while it is being used by workers. Compared to ordinary harness, it has a fully-adjustable height and a broad base of support.

Add safety net system

The net should be positioned as near the roof as possible to at least provide cushion in case falls occur. However, you need to see to it that the quality is not compromised by choosing something tough and thick.

Install a warning line

A warning line serves as a detector that counter-checks the distance of the workers from the danger zone, which is the edge of the roof.

These are just some of the proven safety practices that must be given attention by the proprietors and engineers assigned in the field. Failure to do so will constitute a liability on their part; therefore, sufficient trainings and provision of safety equipment for both workers and non-workers must be ensured.

by:Jacob Schiffer

POST COMMENT

Pro-active Health And Safety At Work Safety Tips For Driving On Wet Roads The Use Of Electronic Massager Should Pay Attention The Popularity Of Prescription Bifocal Safety Glasses Learning More About Gun Safety Search Online For Used Electronic Hardware Bss Offers High-tech Satellite Solutions For Tv And Radio Broadcasters Different Types And Uses Of Emergency Vehicle Lights In Maintaining Public Safety Dpi Flashlight Radio - An Absolute Necessity! Dash Lights Ensure The Safety Of Law Enforcement And The Public Reox Holdings (dairygold): Small Step To Radio Means A Giant Leap In Bandwidth For Reox Tv Swivel Shelves: Unique Design, Easy Accessible And Offer Great Safety To Tv Screen Static Electricity Can Damage Electronics