A Guide on How to Keep Your Wrought Iron Doors Rust Free
A Guide on How to Keep Your Wrought Iron Doors Rust Free
A wrought iron door is a good item to have in any home because this adds a certain charm to the house's facade. Homes with iron doors usually stand out from other homes because these items present a unique appeal to most people that see it. Furthermore, it also adds to the home's value because it offers more security for its residents.
If you have iron doors, the biggest challenge you may be facing is keeping this rust free. Extreme weather conditions like cold winters and very hot summers may increase the rate of corrosion in your iron door. Rain and humid air can do this also that's why protecting your door becomes important.
In keeping the doors rust free, the first step is to clean it thoroughly. Use dishwashing liquid on water instead of detergent because the former not only cleans iron well but also makes it look new. After you cleaned the doors, you may now try to rustproofing. The following are steps to help you with the task.
Use paint as the first line of defense against rust
Paint will be good on your wrought iron doors because it will delay the formation of rust. In getting paints, make sure to ask the suggestion of the salesperson in the hardware. Sales people usually know which brands could serve this purpose well and they could suggest the necessary painting materials for the job. For example, if your iron door has hard-to-reach decorative curves with using a sprayer or a special brush could be the answer for these areas.
Place lubricant on the hinges or joints
Lubricants will be good to maintain your wrought iron doors. Place lubricants especially in latches or handles because these suffer from much use. Remember that lubricants will be good in reducing friction and therefore would make your door work like brand new. If possible, try to get lubricants that have anti-corrosion properties so you could also reduce corrosion build up in these points.
Apply a rust inhibitor
A rust inhibitor may come in a clear solution or in a paint application so you have several choices. Before applying the solution use a wire brush to sweep out most of the rust that may build up from your wrought iron doors. This way you could reduce the amount of rust that may already be present and further safeguard your doors against corrosion.