Center of percussion

Center of percussion

Center of percussion

Further explanation

Imagine a beam is suspended from a wire by a U-bolt so that it can move freely along the wire. A blow to the beam below the center of gravity will cause the beam to rotate around the CG (center of gravity) and also cause the CG to move away from the blow. If the blow falls above the CP (center of percussion) the movement of the CG will cause the U-bolt to move away from the blow since the effect of the translational acceleration will outweigh the effect of the rotational acceleration. If the blow falls below the CP the opposite will occur, rotational acceleration will outweigh translational acceleration and the U-bolt will move towards the blow. Only if the blow falls exactly on the CP will the two cancel out to produce no net movement of the U-bolt.

Calculating the center of percussion

For a free, rigid beam, a force F applied at right angle at a distance b from the center of gravity (CoG) will result in the CoG moving at a velocity V according to the relation:

where M is the mass of the beam. Similarly the torque exerted will be as per the relation:

where I is the moment of inertia around the CoG and is the angular velocity.

For any point P on the opposite side of the CoG from the point of impact, the velocity of point P is

where A is the distance of P from the CoG. Hence:

The velocity v is then given by:The axis of rotation is situated where v = 0 and the corresponding center of percussion is at distance b from the CoG, withThis is also the center of oscillation of a physical pendulum of the same mass M, hung at the pivot point. (The center of oscillation is the position of the mass of a simple pendulum that has the same period as the physical pendulum.)Center of percussion of a uniform beamFor the special case of a free beam of uniform density of length L the moment of inertia around the CoG is:(see moment of inertia for proof)Hence:Relation to the sweet spotThe sweet spot on a baseball bat is generally defined as the point at which the impact feels best to the batter (it is also occasionally defined as the point at which the maximum velocity is imparted to the ball, but this may not be the same point).Although it has long been believed the center of percussion and the sweet spot are the same, recent practical observations have indicated that the point many batters feel is "sweetest" corresponds to a pivot point not in the handle of the bat but beyond the end of the bat.[citation needed] The reality of, and explanation for, this anomaly are currently areas of active research.Application to swordmakingThe center of percussion, or sweet spot, of a sword is the point on the blade where cutting is most effective. It is also the division between the weak and middle sections of the blade.Like any solid object, a sword vibrates when impacted (such as during cutting). In a sword, such vibrational waves are typically almost imperceptible. Every wave expressed by a solid object has rotational nodes where the wave reverses at either end of the object. On a properly-balanced sword, one node is in the tang of the sword (inside the hilt), ideally directly under the primary hand. The other is the center of percussion. On such a armonically balanced sword, this means that a solid blow can be delivered without causing discomfort in the hands. The center of percussion of a sword is related to its center of balance, and both can be moved by employing a heavier pommel or changing the mass distribution of the blade.So-called lade harmonics are a commonly misunderstood concept, especially by sword enthusiasts and their internet communities. The common belief is that a sword must be armonically balanced in order to cut properly, because the vibrations would otherwise interrupt the line and power of the cut. As explained above, this proposition is false: the vibrations caused by a sword cut are almost unnoticeable except as a mild stinging to the hands even in blades that lack this quality. It has also been demonstrated that the object the sword cuts through serves to further reduce the intensity of any vibration, making it even less noticeable.Many experts speculate that harmonic balance is merely a byproduct of proper construction and balancing, rather than an intentional quality added to weapons. Unfortunately, some sword vendors advertise "secret techniques" of harmonic balancing in an attempt to "prove" the superiority of their products. This only serves to amplify the false impressions of the value of harmonic balance by seeming to lend them legitimacy.LiteratureGeorge Turner Sword Motions and Impacts: An Investigation and AnalysisReferences^ Cross, Rod (May 2004). "Center of percussion of hand-held implements". Am. J. Phys. 72 (5): 623. doi:10.1119/1.1634965. http://www.physics.usyd.edu.au/~cross/PUBLICATIONS/26. COPHandHeld.PDF. Retrieved 2008-11-29.^ What is the COP and does it matter?See alsoWeight distributionCategories: Swords | Martial arts termsHidden categories: All articles with unsourced statements | Articles with unsourced statements from March 2007 http://www.articlesbase.com/industrial-articles/center-of-percussion-2804322.html

POST COMMENT

Don't Be Afraid to Personalize Pyrolytic carbon Still-Life - The Work of Fine Art Frequently Asked Questions About Tummy Tuck Abdominoplasty New England Patriots 2010 Season Predictions The Benefits Of Ppc? The Most Basic Of Rubber Wristbands Is The Most Popular Trim 5 to 20 Pounds Off While Utilising Oxy-Powder Mount Gushmore Century Wavemater XXL Heavy Bag - Can it Stand the Abuse? Toothbrush So You Think You Want a Used Jeep! United States open container laws