Flame Cutting: How Essential For Todays Industries
Flame cutting is also known as oxygen cutting where the suitable part of the material
to be cut is raised to ignition temperature by an oxy-fuel gas flame. The process of metal cutting is broadly used for separating and crafting steel components in industries.
The process of flame cutting or oxy-fuel gas cutting
The process of flame cutting or oxy-fuel gas cutting involves a mixture of gasses to develop a controlled flame which is used to cut through different types of metal. The gasses used in oxy-fuel cutting include oxygen as well as acetylene or propylene. During the combining and igniting of these gasses, they produce an intense flame with temperatures exceeding 2000 degrees Centigrade. The temperature of the metal is determined by the incineration of the fuel gas as well as the continuous stream of oxygen.
These gasses are bound for the outside of the steel metal with a flame cutting burning instrument. A chemical reaction happens on the steel sheet where the flame is bound for. The gases are used to transport the metal to melting point, not to really melt the steel metal. This chemical reaction is originated by the high temperature of the steel metal that comes into touch with oxygen. The oxygen mixes with the steel to oxidize the metal immediately which produces the cut or kerfs in the steel.
As the Flame Cutting is known as a destructive phenomenon that happens in several firearms as a result of high temperature of gasses, so the oxygen is essentially used to remove the melted steel as it is driven into the kerfs or scratch on the metal with pressure. By controlling the flow rate of the oxygen various types of cuts are made.
Flame cutting is usually done instantly with CNC machines
Metal or flame cutting is usually done at high speed by using CNC devices which use multiple firearms, which makes it ideal for production runs that need a high quantity of exactness repeated. The method of metal cutting is usually used to cut through thicker steel plates instead of a laser metal cutter device. Thus the process is often the first of other procedures used to cut or craft steel or other metals.This procedure is the best alternative for end-users needed inexpensive cutting of carbon steel and most alloys. But, Flame cutting produces a very hot zone around the cutting system that may need to be removed by other machining.