Hardwood Flooring Installation On Concrete

Hardwood flooring is a common and popular type of application found in many homes

. A wood floor always seems to give a home a warm kind of feeling. With advancements and techniques, it is even possible to lay it over concrete. In this article, we will outline the steps necessary to lay your wood flooring over a concrete base.

Tools / Materials

Mineral Spirits

.25" Round Molding

Tape Measure

Saw

Painter's Tape

Adhesive

Hardwood Flooring

Paint Roller

Moisture Barrier

Level & Sander

Preparation

Step 1 - Once you've purchased your wood, keep the materials in your home for a week's time in order to allow them to acclimate to the home's temperatures. Due to how the material expands and contracts, this will help eliminate added adjustments later on.

Step 2 - Clean the treatment area making certain it is completely dry. Also keep in mind that the material cannot be placed on fresh concrete for a period of at least sixty days.

Step 3 - Inspect the concrete for any high or rough spots. Using a sander, scale down any rough spots till they are level. Be sure to clean up any sand or dust left over.

Step 4 - Using a paint roller, apply a moisture barrier. This is act to seal the concrete and give added protection to the wood. Allow to dry over sixteen hours.

Installation

Step 1 - Apply the adhesive to the floor, starting at the edge of the longest wall. Place the flooring directly to the adhesive, and press down.

Step 2 - While you apply, use mineral spirits, dabbed on a rag to help remove excess adhesive from the surface.

Step 3 - Be sure to leave a .25" gap between the wall and the wood material. This is required for expansion and temperature changes.

Step 4 - Use a simple painter's tape and tape the boards together. This will work to keep the planks in place once they have been laid onto the surface area. Continue laying planks.

Step 5 - Once you've completed placing all of your boards, walk around the entire home in order to make sure that each plank is stuck to the adhesive. Do not spend too much time in the room, and do not allow traffic in the area until a good twelve hours has passed.

Step 6 - Once your adhesive has dried, nail the .25" molding to the wall in order to cover the expansion joint.

by: Andrew Stratton

POST COMMENT

A Step By Step Guide To Hardwood Floors Installation And Maintenance Steam Mopping and Sanitizing Hardwood Floors Sand and Refinishing for Hardwood Floors The Benefits Associated With Hardwood Floor Nail Gun Models Refinishing Hardwood Floors: How To Do It Ifloor: The Basics When Choosing Hardwood Flooring Hardwood Floor Installation Methods Shine Hardwood Floor Like A Pro Diy The Simple Process For Caring For Hardwood Floors How to Refinish Hardwood Floors? Things To Clarify Before Entering A Hardwood Floors Store In Denver Hardwood Flooring - Getting Acquainted How Hardwood Differs From Softwood Or Manufactured Wood