High Voltage Servomotor Driver For Dmc Systems

Toronto, Canada - GAO Embedded (www.GAOEmbedded.com) is offering its high voltage

servomotor driver for high performance Digital Motor Control (DMC) systems. It is based on Texas Instruments' TMS320F2812 DSP and is intended for use as a packing mechanism, USP, variable frequency controller and electrical controller.

This high voltage servomotor driver, model MCK2812, is part of a reliable and fast servomotor driver solution which consists of three parts including an EVM2812 board (DSP part), an HVD (driver part) and an IB2812 (interface part). It uses an IPM module to protect the board from over-current, over-voltage, under-voltage and over-heating. A non-inductive absorbing capacitor is used to eliminate surges and spikes caused by DV/DT effectively protecting IPM. It provides an on-board 60 W rebounding power switch to supply large current for a safe system and on-board filter to minimize EMI interference based on the FCC-15 standard. It has a high speed optocoupler for electrical isolation and provides 8 channels of isolated output.

When operating along with GAO's EVM2812 board, it can directly connect with one or two DC brush/brushless servomotors, AC asynchronous motors, AC permanent-magnet synchronous servomotors or stepper motors to constitute a digital servo motion control system. The practical evaluation board offers a Hall Effect sensor to ensure the accuracy and isolation of current sampling. The evaluation board also provides a PWM frequency of up to 20 kHz. In addition, it has a standard RS232 port and a CAN communication interface for data exchange.

This high voltage servomotor driver belongs to GAO's family of TI DSP Evaluation Board. A similar product in this line is MCK2812 LV (Low Voltage) Servomotor Driver. This line also includes 2812EVM-II Evaluation Board, IB2812 Interface Board, and some other similar products.

For sales inquiries please contact:

1-877 585-9555 ext. 601 - Toll Free (USA & Canada)

1-416 292-0038 ext. 601 - All Other Areas

sales@gaoembedded.com

Toronto, Canada - GAO Embedded (www.GAOEmbedded.com) is offering its high voltage servomotor driver for high performance Digital Motor Control (DMC) systems. It is based on Texas Instruments' TMS320F2812 DSP and is intended for use as a packing mechanism, USP, variable frequency controller and electrical controller.

This high voltage servomotor driver, model MCK2812, is part of a reliable and fast servomotor driver solution which consists of three parts including an EVM2812 board (DSP part), an HVD (driver part) and an IB2812 (interface part). It uses an IPM module to protect the board from over-current, over-voltage, under-voltage and over-heating. A non-inductive absorbing capacitor is used to eliminate surges and spikes caused by DV/DT effectively protecting IPM. It provides an on-board 60 W rebounding power switch to supply large current for a safe system and on-board filter to minimize EMI interference based on the FCC-15 standard. It has a high speed optocoupler for electrical isolation and provides 8 channels of isolated output.

by: GAO Embedded

POST COMMENT

Security Camera Systems Are Indispensable Strengthen Your Residence With The Security Camera Systems Why Security Camera Systems Are Essential Nowadays? Onboarding Advanced Management Systems Underground Drainage Systems Different Kinds Of Alarm Systems, Do You Need Them All? Motion Detectors As Special Devices For Alarm Systems Protecting Your It Systems Better Systems Of Day Boarding Schools In Delhi Compulsory Ce Marking For Beam-and-block Floor Systems Insights To The Types Of Contaminants Found In Fuel Systems Best Security Systems- How To Know The Importance Of Cctv Camera Security Systems