A pint glass is a beautiful collectible for yourself or as a gift for your lovely friends
. With just some tools and also some instructions, you can easily custom engrave your glass with the design as your choice. You do not need to wait for the mail order to drive around to do the engraving for you. You do not need to pay a set up charge then you can have your personalized pint that will be ready when you need it.
For the first step, you need to design the artwork on the computer with any software. Keep it simple if you are not actually done with any engraving before. Print your artwork and after that cut it out therefore your design will fit into your pint glass.
For the second step, you should insert your design into your print glass and then tape it into the inside wall of the glass therefore you can see it on the outside of your glass. This will also be the template from which you will engrave. This will also help you stuff the dark rag into a jar for the background the e best show off the design.
After that, you can turn on the Dremel tool to the high speed and remember to not touch the glass until it has reached its speed. Ensure that you have your goggles on in order to prevent any little bits of the glass dust from getting into your eyes.
After that you need to trace the design that is taped to the inside of your glass by using the bit as it were the pen. Treat it just like the permanent marker as if you touch the glass, it will mark it.
For the last step, you can wipe the surface of your pint glass so often when the dust builds up. The rag must be slightly damp just therefore the dust will cling to it; this will not make the glass to be wet.