When getting your driveway paved there are a few little things that can be done to ensure a profesional looking job. When looking ata finished driveway one thing that stands out is the edges. When the edges are straight, smooth, and tamped the driveway will always have better curb side apeal than a driveway that doesn't. To get nice straight edges you must use stakes and mason line. The mason line will also let you get a feel for the size of the driveway. Seeing the size of the driveway when its layed out for you will tell if you need to make it larger.
Once the string line is up and the paving of your driveway starts. Make sure that all of your edges are tamped on a 45 degree angle. This is how you reinforce the edge of the asphalt and give your driveway a smooth look. Reinforcing the edge is very important because the edge of your driveway is the most vulnerable to cracking. Another impotant part of a good looking professioal job is the roller. While the driveway is being rolled make sure all the seams are pinched. Pinch rolling is when you roll 1 inch over from the 1st strip to the secound.If your driveway is two cars wide than the seam would be in the middle.Sometimes seams are unavoidable but if you take the time to tourch those seams while pinch rolling you will beahead of the game.
The last thing that will finish off your driveway is the apron. The apron of your driveway is where the asphalt meets the street. Some companys feather into the street but the plows will break it down over time. You need to use a demo saw to cut a strait line into the street. This way the new blacktop will still have 2.5 inchs of asphalt in the apron. Plus there will be no lip at the entrance of your driveway it will be flush with street. Please make sure that the company you use blocks off the driveway at the end.Just these little things in the job can make a big differance when it comes to your driveway.http://keatorbuiltpavingandsealcoating.com