Maintenance and use of liquid crystal display (lcd) skills
Maintenance and use of liquid crystal display (lcd) skills
Maintenance and use of liquid crystal display skills Laptop battery
Enjoy every day that the distinctive high-end LCD display at the same time, do not forget the maintenance of this vital link. LCD only well maintained, only the long-term trouble-free service for users. If you already have a LCD or flat panel display, here are some tips to be useful for you. Should be clear that the expensive LCD, just follow some simple maintenance steps, you can HP Pavilion DV6000 LCD Screen loyally for a long time service in the LCD, the only part of a progressive consumption is the display of the background lights. After long-term use, you will find the screen becomes dim or simply not bright, in both cases, as long as the replacement of background lighting can make the LCD back to life to become as good as new.
1. Inside of the screen to avoid burn out
Remember, CRT monitor can work because of long-term burn, also the case for the LCD. So be sure to remember, if you do, be sure to turn off the monitor, or reduce the display brightness of the display, or a long time, can lead to burn out or the internal aging. This event is permanently damaged and can not be undone. So be sure to attract much attention. In addition, if a fixed time to display the contents of a row, there are some LCD pixels can cause overheating, which causes internal burns.
To avoid this internal burn, when not in use can take the following measures:
1) Turn off the monitor when nothing;
2) frequent changes in different time intervals displayed on the screen content (such as running a screen saver)
;
3) the brightness of the display is reduced to a dark level;
4) Display the contents of an all-white screen.
2. Maintain the humidity of the environment
All have since spilled the drink on the keyboard and causing damage to the keyboard users are aware of this common sense. Do not let any of what nature has moisture into the LCD. Found in mist, with a soft cloth to gently wipe before you can turn on the power. If the wetlands were already into the LCD, the LCD must be placed on a more warm, dry place, so that when water is evaporated and organic compounds. Containing moisture LCD power, LCD electrodes can lead to corrosion, and cause permanent damage.
3. Properly clean the screen surface
If you find that the display surface stains, use a soft cloth moistened with a little glass cleaner, gently wipe, do not spill detergent directly to the display surface. Detergent into the LCD screen will lead to short-circuit.
4. To avoid unnecessary vibration
LCD screen is very fragile, so avoid strong shock and vibration. LCD is about the home or office users all the supplies in the most sensitive electrical equipment. LCD glass and contains a lot of sensitive electrical components, fell to the floor, or strongly against other similar LCD screens and cause damage to the CFL unit. Also careful not to put pressure on the LCD display surface.
Introduction and maintenance of fire detector principle of cleaning - fire detectors, fire alarms - Fire Industry Building Maintenance Procedures For Your Office Proper Maintenance of AC Units to Keep Them in Good Condition Always Usage And Maintenance Of Stainless Steel Cookware Maintenance for the Valves Mobility Scooter Maintenance and Upkeep Guide Wintry Weather Is On Its Way And Make Sure You Remember The Central Heater Maintenance Tasks Great Maintenance for Hospital Bed Plant Relocation And Maintenance Bifocal Glasses And Their Maintenance Vigilance "cottage Version Of" Small Appliances Use More Attention To Maintenance Needs - Slight Air-conditioning Maintenance Violations Chainsaws Require Caution And Maintenance