Network Step By Step Description(a)
use DSL access and share printers, share files easily - a home network work easier and saves you money. We show you step by step how to set it up perfectly.
Already with two computers, you can take advantage of a home network: shared via the fast DSL connection, surfing the printer share access with other users on the same files. With our step-by-step instructions to set up your network an easy and secure. First, we dedicate ourselves to the wired network. If you want to give up cable clutter and create a wireless network, you go straight to the second part, "WLAN Setup from p. 3
Network setup
A network must have three conditions: The computer must be installed and a cable or radio to be connected. You need to identify a unique IP address each other. In addition, the operating system for data exchange, and - if desired - the sharing of peripherals to be configured.
Share:
Step 1: Install Hardware
Usually on the motherboard is an integrated network chip (see the manual or device manager). If not, you need a network card (from 30 ) that you build into the appropriate slot (PCI, PCI Express). Then install the drivers for the network component. The driver CD is on the motherboard or the NIC. Check the connection, if the hardware shows up under Network Adapters in Device Manager. Is this not the case, or is behind the entry, a yellow exclamation mark, you should install the driver again. Does that help any further, please download from the manufacturer's website an updated driver. How to install the hardware for a wireless network, are described under "WLAN Setup from page 3
Step 2: Software Configuration
Here we describe the procedure for Windows XP. In Vista's is a bit different - as we show on page 2
Go to "Settings, Network Connections, click the right mouse button on" Local Area Connection "and select the shortcut menu, choose Properties. Check now whether in the "General" stands in front of the items "Client for Microsoft Networks, File and Printer Sharing for Microsoft Networks" and "Internet Protocol (TCP / IP)" is checked. If there is no check mark in front of an entry that you bind the function by clicking on the Install button one. Finally, you need to assign each computer on your network an IP address. We recommend that you obtain the IP address automatically. For this you need a computer, dial in on the other network computer to the Internet, or a router, in which the function of DHCP is enabled (see router manual): In both cases, you double-click in the other network computers' Internet protocol (TCP / IP ) ", select" Obtain IP address automatically "and click" OK ".
To know more:omnibook 6000 battery Pavilion zd8000 Battery pavilion dv6000 battery pavilion zv6000 battery thinkpad r30 battery thinkpad t40 battery;
by: batteryzone