Make sure that you hire the services of an experienced sanding company. Another point to be kept in mind is to prepare the floors for effective sanding procedures and to avoid any sanding marks or grooves while sanding floors. All the loose wooden planks should be tightened and necessary repairs like filling up the holes should be done before the sanding process starts. If there are any nails that have come out; they should also be removed.
A good quality sanding machine
For an amazing restoration of your wooden floor, sanding floors with a good quality sanding machine is very important. Technology has been constantly improving over the years. There are new high-tech machines that are much easier to use and are also more effective. An orbital sanding machine and a dust free machine are an improvement over traditional sanding machines. With these machines, you need not worry about the creation of dust or about sanding the floor in the direction of wooden grains.
Other essential tips for sanding floors
There are certain points that should be followed after the sanding of the floors is completed. Usually, the coatings take at least 3 to 4 hours to dry. Make sure that you do not step on the floor till the coating is totally dry. It is better if you walk on the floor bare feet for at least a week after the completion of sanding process. Another important tip is to wait for at least a fortnight before you place any heavy furniture or rugs on the floor. This is essential to let all the moisture in the floor to dry and allow the floor to harden properly.