Some Maintenance Tips To Ensure Your Table Saw Is In Perfect Condition
Some Maintenance Tips To Ensure Your Table Saw Is In Perfect Condition
What steps should you take to maintain your table saw in good condition? You must recognize the various components and maintain each and every component properly. The first and the most important component that you should use is the table saw itself. The saw is a metallic and sharp edged object that rotates at high speed to cut the wood. Needless to say, the saw must be very strong to withstand the impact with the wood at high speed.
Further, the edges must be very sharp to reduce the stress that is passed on to the body of the saw. In such a scenario, you will have to make sure that the edges are sharp and that there are no cracks on the surface of the body of the saw. If the edges are kept sharp, the wear and tear on the body of the saw will automatically come down. This is a very useful tip to maintain your table saw properly.
If you have the habit of working late in the night and stopping the table saw and simply walking out of your workroom, chances are high that you will have to spend a lot of money maintaining and repairing your saw. This is because the wooden shavings and the clips often reduce the sharpness of the saw.
Make sure that you wipe the saw with a soft cloth and make sure that it is completely clean and dry before you stop work for the day. It is advisable to devote fifteen minutes of your latter hours towards maintenance only. This will ensure that each and every part is in good working condition. Further, daily inspection will ensure that you identify possible problems as early as possible.
Another factor that you should consider is the moving objects in the saw. The table saw is connected to a motor which rotates the saw at high speeds. It is obvious that you will have to take care of the motor just as you take care of any other mechanical or electrically powered device.
You will have to make sure the electrical connections are strong and steady. The motor should operate at normal speed without any unnatural noises. It should be well oiled and should be well greased. Further, you should have an expert look over the motor once in a while to ensure the internal components like winding and bearing are in good shape.