When your overhead projector gets problems, it will be a bad news for you because your presentation can work well so you must do something right to repair it very well. The process of repairing can be difficult but you yourself do it by following the instructions below. If you are able to follow with doing much effort, you will be able to gain the best results that will be important for you.
1. The first step you need to consider in the process of repairing is to check the bulb. The bulb is an important thing which is related to the correct voltage for the machine. About the information of voltage, you can see it on a label which is located at the back of the machine. If you have to replace it, you do not need to be worried because it is available in wide options it is also sold at office supply stores so you can gain it faster.
2. The next step you must know is to make sure that the wire is not loose from the plug. In this case, you can do tugging gently on the cord to ensure about this kind of problem. After it, it is important for you to cover the exposed or frayed wires with using electrical tape.
3. The next step in the process of repairing you must do is to remove the top of the projector. After that, it is suggested to do comparison about the wiring and the diagram in the manual provided by projector. In this case, it is important for you to check all the wires and be sure that there is no one that is missing. If you do not have the manual, you can gain the information by reading the back label given.