Understanding R-Value
R-Value has long been part of the building and construction industry as the measure of thermal performance of a structure
. It has been a long-held belief that higher R-Value is the same as more efficient building insulation. Spray Polyurethane Foam (SPF) has changed some of the most common beliefs associated with R-Value. There are many places online that discuss the R-Value "Myth" or "Fairy Tale". Before talking about the "Myth" and "Fairy Tale" argument given by some, Paratus would like to give brief definitions of two important terms:
Conduction: transfer of thermal energy between neighboring molecules in a solid substance such as insulation.
Convection: transfer of air molecules through insulation and ultimately the building envelope.
R-Value is a measure of a material's resistance to heat transfer. The R-Value test performed under the guidelines of ASTM C518 takes into account the resistance of all three heat transfer mechanisms: conduction, convection and radiation; however, convection is given only minor consideration. Unwanted convection through the building envelope is the biggest contributor to energy loss.
Conduction typically accounts for 20% of a building's heat loss, while convection accounts for up to 80% of the energy loss depending on the quality of construction. Any convective loops inside the insulation material are taken into consideration by the R-value test method, but air leakage through the entire composite building envelope is not considered at all. Closed cell spray foam at " can stop 99% of heat loss by convection and at 3 will prevent 95% of heat loss by conduction. Obviously, the same holds true for an air-conditioned structure.
Commonly Asked Questions and Concerns
As a contractor in the spray foam industry, questions about R-Value are some of the most common concerns of home owners and builders. To help contractors and home owners alike, Paratus has compiled a short collection of Common Questions and Answers:
"The higher the R-Value the better, correct?"
Yes, higher R-Value in your home or building is somewhat better; however, it should not be overrated at all.
SPF's ability to create an air-tight seal for your home is the most important factor in creating an energy-efficient, comfortable, and healthy home. About 80% of the energy loss of your home or building is caused by unwanted and uncontrolled air flow through the walls, ceilings and floors.
"What is the R-Value of your product?"
R-Values vary by manufacturer.
Closed cell SPF offers higher R-Values per inch than conventional insulating alternatives.
Most importantly, only spray foam provides total air tightness. As a matter of fact, just a little more than 2 inches (5 cm) of closed-cell foam provides a vapor barrier. No other insulation system can provide that! When promoting foam, the air-tightness alone should be a compelling reason to insulate with SPF.
Good understanding of R-Value, air leakage and air changes in a home or building is a crucial sales tool for any foam insulation contractor. Besides home owners, even professionals like builders and architects often have not thought through R-value vs. air leakage, and need to be educated by all of us in the foam industry.
Understanding R-Value
By: John S
Ce N'est Pas Tout Fait Une Bourse De Soie D'une Truie L'oreille A Primer On Cast Iron Cookware How to Wash Your Dog First Get A Diagnosis Is It Ok To Nap? Choosing the Best Roll Down Shutters Awareness Wristbands For A Cause Faut-il Avoir L'elles Disent Que Vous Devez Avoir The Proficiency Point How Green Are You? Led Light Bulbs How to choose a vet Baking Your Own Cake For A Celebration Katy's Tropical Fish