What Are The Benefits Of Using Waterjet Cutting
The waterjet cutting is becoming a popular option as an environment friendly method of cutting materials
. In waterjet cutting, a steam of water under high pressure is released on the piece of metal to be cut. Further abrasive materials can be added to enhance effectiveness of the method. In the nature, we have seen water to cause erosion to hard rocks; the same technique then is used in cutting metal through waterjet cutting.
There are several benefits of using the water jet method for cutting metal which have made it a popular choice for many businesses. Following are some such benefits of using these techniques over the traditional flame cutting technique.
Ideal for sensitive materials: Water jet cutting method is specifically used when the material is sensitive to heat and may become brittle under high pressure. You can't use the flame cutting technique to cut through these materials.
Tension free cutting: With water jet cutting you wouldn't have temperature affected zone as may be the case with flame cut materials. Hence, you can often skip the stages of finishing the materials after cutting.
Non interfering: Water jet cutting is favoured because of its non interfering nature. Unlike flame cutting technique, it allows the material to retain its intrinsic structure. Hence, it is ideal for high performing materials.
Cut hardest materials: Water jet cutting technique is as effective as flame cutting and can cut through hardest of metals. It can even be used to cut stainless steel.
Specific cutting: Water jet cutters are capable of attaining accuracy of 0.005" i.e. 0.13 mm. Water jet cutting is therefore preferred for its precision. Also, the Kerf with water jet cutting is minimal. Hence, very little material is wasted during the cutting process.
Wide application: The pressure of the steam can be easily adjusted to match the hardness of the metal. It can be easily increased or decreased without making too many adjustments to the machines.
Availability: Water is available in abundance in the nature. Further it is reusable, unlike flame cutting methods.
Green technology: It produces no hazardous waste and therefore allows the businesses to save on waste disposal expenses. Further, water jet cutting don't produce harmful particles which can be hazardous if inhaled.
Easy to handle: Water jets are particularly lighter than flame cutting machines. The robot head with water jet can be easily maneuvered for cutting metal. Further, it can be fully automated.
In water jet cutting, the pressure can be raised up to 60,000 pounds per square inch. Hence, it can easily be used to cut stainless steel. Further, abrasive water jet can cut through metals and materials like- titanium, stainless steel, kevlar and laminates. Water jet cutting is relatively a new method but it has found its use in various industries. It has become a preferred method for cutting high performance material. Unlike flame cutting technique, it is also considered as a green method.
http://www.daysteel.co.uk/
by: CHARLES DAY LIMITED
Making a property let- not an easy job Bemer-Bemer Откатные Ворота Своими Руками It's time to make your office Ergonomic Seeking Venture Capital 5 Features We Like About Joomla! Why I Heal Faster Than Anyone Else Celebrate Durga Puja With Traditional Silk Sarees Neck Massage: Ease Cramps Faster Club Med Resorts ASHMAX Sign-up Guarantee! Do You Know Symons Cone Crusher Relieve Pain Faster While Spending Time Together