What To Consider Before You Tile A Bathroom

What To Consider Before You Tile A Bathroom

Tiling a bathroom is a DIY job that most people should be able to master if they want. You will need to know which type of tiles to buy and you will also need a few specific tools to hand.

As it is an area that can get very wet, the right type of tile needs to be used. Your bathroom tiles will need to be vitreous or impervious to water to prevent damage. Porcelain tiles are a particularly good choice. They can be coloured all the way through or simply glazed with the colour. They are incredibly hard and are good as floor tiles for this reason. Marble tiles, granite, slate, and sandstone are also great for floors and can also be used on walls, counters and back splashes. Floor tiles need to be hard-wearing so that they last, and also not too smooth to prevent people slipping up. Look for a tile with a coefficient of friction (COF) rating of at least 0.60, dry and wet. Quarry tiles can be used in wet areas, but they stain easily so may not be the best choice. A sealant will be required for natural stone tiles.

Wall tiles will also need to be vitreous or impervious but don't need to be particularly hard-wearing as no-one will be walking on them.

If you have a small bathroom, small sized tiles will make it look bigger, and for a roomy bathroom you can use large tiles to reduce the overall impression of size.

To order the correct amount of tiles, you need to measure the length and width of the area to be tiled and multiply one by the other, then add at least 10 % to that total to allow for breakages etc.

You will also need grout and tile spacers. Use sanded grout for granite, porcelain and other single fired tiles. A grout spreader will also be needed.

It's important to always use a waterproof tile adhesive for areas that will get wet. You can often buy these ready-mixed but some will require you to add water yourself. For flooring, choose a thinset mortar adhesive. On counter tops, it is usually ok to use mastic under and over the cement backer board. Get yourself an adhesive spreader to help spread the glue and find a damp sponge to wipe away the excess.

You will also need a tile cutter, tile saw, tile cutting jig and tile nibblers to cut your tiles to shape and a spirit level to make sure that your work is straight!

Whilst most items will need to be borrowed, bought or hired, there is something you can make yourself. A gauge stick will help you plot the position of the tiles on the wall and one can easily be made from a length of softwood.Put several tiles next to the wood (adding in the spacers) and mark off the position of each tile along the stick. Use a spirit level to ensure that this is straight. The gauge stick is now complete and can be used to set out the rows of tiles on each side of it.

With the right tiles and tools, your bathroom project should be a success and actually quite enjoyable to do!

POST COMMENT

Thinking ABout Your Own Personal Reading Area In Your Own Home Modular Log Homes Mean Reduced Costs The Easiest Method to Changing A Flat Tire Go Green With Techniques On Home And Garden Improvements Holiday on a Shoestring - and Give Yourself Something to Write Home About Writing good articles, tips from an article directory owner Installing The Reverse Phone Lookup At Home Print your own pvc cards and identify your employees Developing Your Home Office Where to Invest in Florida's Hot Real Estate Market Interesting Green Home Builder Facts Have Thrifty and Creative Outdoor Dining Using Folding Tables Exercise to Firm Breast at Home