Why Use Mechanical Seal Support Facilities?
In Fluid Machinery, working conditions should be considered the most demanding parts of mechanical seals
. As axial thrust bearings as force; as the heat exchanger as the heat generated by export. In the high temperature, high pressure, corrosive and other parts have been difficult to achieve static seal, require high-speed rotation, in a few millimeters wide end seal dynamic sealing surface to achieve even more difficult. In order to solve this thorny problem, the long-term practice by Laos, people have found two ways: First, the structure and material from the seal to start, to adapt them to harsh working conditions. This is the cost of higher cost, however, not fundamentally solve the problem. Once the seal failure, serious consequences. Another way is through the support facilities to improve the working environment. At present, the actual work without any aids rare mechanical seals. Such as the use of tandem high-pressure high-temperature pump mechanical seals, and so on must be the appropriate ancillary facilities. By supporting facilities to some of the harsh working environment has changed for the seal can be accepted, so the effect of greatly enhanced mechanical seals, using the scope is broader. Mechanical sealing friction generated heat, so temperature seal faces, such as the facilities do not take, will have many negative consequences.
1. The increase of temperature between the liquid film vaporization seal faces, wear increased, so that seal failure:
2. Temperature to produce thermal deformation ring movement, leakage increased, wear increased;
3. Temperature also increased the corrosion medium on the mechanical seals;
4. Auxiliary ring so that the aging temperature, deterioration and failure;
5. Temperature, synthetic resin impregnated graphite, carbon and the performance degradation due to resin, immersed metal graphite ring, because of the metal melt and leak.
Thus, the temperature rise is the mechanical seal does not allow the enemy. Auxiliary facilities in order to: reduce the temperature rise that people do not want to maintain good lubrication between seal faces state, so that each part of a good mechanical seal, normal work; easily vaporized in the medium to ensure that the pressure in the sealed chamber, so that The non-vaporized; pump seal at low temperature can play the role of insulation and heating; For the crystallization of solid particles occurs and the seal of strong corrosive medium, but also maintain the seal is not compromised. Therefore, some countries known as the protection system to aid system. 1983 China Petrochemical Corporation was organized on the pump seal seven petrochemical investigation said: "The imported seal centrifugal pump and compressor, according to different conditions with different ancillary facilities. Proved. Are reasonable structure , material good and ignore the ancillary facilities, resulting in difficult working conditions. lead to early seal failure. On the contrary, some occasions, the structure and materials is not enough to meet the requirements of working conditions, efficient facilities, urging the seal meets the conditions of work requirements, the successful operation. "
Some mechanical sealing temperature, pressure and speed is not too high, you can work without aids. However, the stability and service life of sealing point of view to consider, with supporting facilities is beneficial. Therefore, ancillary facilities should be seen as an integral part of mechanical seals, according to different working conditions, using different support facilities. Common international standards for the American Petroleum Institute, which have made specific provisions. Correct, that is reasonably designed facilities, not only the stability but also to extend the seal life of great significance; on safe production and to reduce leakage, reduce the maintenance workload and reduce production costs to a certain extent, must be given sufficient attention. Support facilities protection system was known as the sealing cycle, or referred to as sealed system or protection system.
by: lucy00123
Driving With All Kinds Of Distractions You Can Treat A Herniated Spinal Disc Enlightenment siti incontri Changes that have occurred to Tier 1 general How To Make A Kite Ore Crusher Establish A Project Lending Library On Your Project Dont Let Dwi Consequences To Affect Your Life For Years To Come Best Bait for Bluegill Acai Pulp Contains Powerful Antioxidants Naples Infiniti M45 May Replace The Q Model Indefinitely Webinars: Do It Properly, Seek Help From The Expert