You Can Activate The Battery Well Of Chemical Substances, To Maximize Battery Performance

you can activate the battery well of chemical substances

, to maximize battery performance, basically the normal battery after each use can charge to 100%. Maintenance and storage

1. If the battery is a long time (several months) do not, remove the saved backup from the machine. Recommended that each month and a half or so once the battery discharge and charge order to improve the state of your battery to increase battery capacity.

2. If the battery is not a long time, it should be set to charge 30 to 50% in stocks, it is recommended to charge the battery about once a year, and its power set to 30 ~ 50%, to prevent excessive discharge and damage the battery. The battery is set to 30 ~ 50% of the specific methods of operation are as follows: When the battery charge is greater than 50%, power consumption can be switched to 30 ~ 50%. If the power consumption of less than 30%, the first switched power to the 3% to 100% recharge and then switched to 30 ~ 50% of power can be.

3. Use the battery to high temperatures and a cold environment, the battery performance will be temporarily reduced. Shall be deposited in standby mode and store the state of the battery placed in the cooler areas, for the battery, the best temperature range is about 10 to 20 degrees Celsius. Attention in use:

Battery is a "consumable", the battery consumption depends on when you use the battery for the correctness of the operation, the operation mode, operating frequency, the working temperature, storage time (not used on the battery) and other factors .

1. The number of battery charge and discharge directly to the battery life, the number of ordinary lithium battery charge and discharge is only about 400 to 600, 800, but also improved the product several times, once for each charge the battery on the end to the use of a step forward. (85% less power when on battery to charge, will be recorded and to increase the number of times a single charge.)

To this end, when the battery voltage is greater than the battery management process set initial value of 96% charge, and you have 220V current place in which AC power, AC power should be used to minimize the number of battery charge to extend battery life. Laptop battery

ACER Laptop Battery

ASUS Laptop Battery

COMPAQ Laptop Battery

Dell Laptop Battery

HP Laptop Battery

IBM Laptop Battery

SONY Laptop Battery

TOSHIBA Laptop Battery

by: combattery84

POST COMMENT

Why Poor Performance Doesn't Always Get Better Use Wiikey 2 And M3 Real To Boost The Performance Of Your Nintendo Wii High Performance Fiber Optic Identifier Features Low Bending Loss Performance Is What Ibm Power Systems Provide Infrared Thermometers And Their Desired Qualities For Great Performance Variations Involving the Situated Performances of CPVs Ways To Formulate A Theatre Performance Assessment Power-up Your Kiting Experience with High Performance Traction Kite TOTO Aquia Dual Flush Toilet – Saves Water without Compromising Performance SizeGenetics and sexual performance Brake Rotors - Choose The Right Performance Level Suning Appliance: Chains Promote The Performance Scale Double Feeling Alert And Energetic - Optimum Performance