Air Conditioning Units - Preventive Maintenance In 3 Steps

Regular maintenance is important for the life of your air conditioning units

. Preventive maintenance of units is far easier than correcting problems down the road. As, it is said, prevention is better than cure. On an average, normal life of a residential air conditioning system is around eleven to fourteen years. If maintained properly, these systems can run even more without any need to repair.

If your residential air conditioning system both cools and heats your home, you must maintain it in fall and the spring season each year. If it is only for cooling purpose you must get it checked at least once a year before the season requiring cooling begins.

For your air-conditioning units, preventative upkeep can be done in just 3 easy steps to save you from unexpected exasperating breakdowns or wrong functionality. The following three steps may also be referred as a tick list for carrying out the upkeep work methodically and comprehensively. I advise employing a trusted HVAC contractor to follow thru with the three steps :

Step #1 : Check the outside units With a little help from a technician, you can check the entire system for a satisfactory level of the refrigerant, cleaning the waste from the interior cupboard, clear the drain openings, clean the coil and check the fan blades and the motor for observable sign of wear. You need to also check the control box, other related accessories including wire networks and connections. It is sensible to guarantee all of the electrical units are functioning correctly and safely. You need to also check the compressor and the attached tubes for any sign of damage.

Step #2: Inspect the indoor units Clean the blower wheels and motor, and provide lubrication to the motor if necessary. If any faulty functioning is observed, replace that part immediately. You must inspect the combustion blower for debris and clean it. Checking gas leaks from furnaces is also important to ensure a proper functioning air conditioning unit. If your system also has heating facility, you should also check the ignition system and other safety elements. You should inspect if the flue system is properly attached to the furnace, look for sign of corrosion and for any dislocated element. Then you clean the air filters and inspect the wiring connections. An overall inspection for the system is also important to find out if there is any leakage in the airflow system.

Step #3 : Check the system although it is operating When you switch the system on, look for its beginning traits and notice if there's any disorder. You can get a clue from the noise it creates when switched on. You have to also look for any peculiar odour that comes with switching on the system. You may then measure the temperature and adjust the airflow according to the level desired. You have to check the vents or openings in your house for correct airflow. Another crucial inspection you need to make is about the energy load it takes to perform.

With air conditioning units, preventive maintenance is vital to saving yourself from breakdowns at unexpected times, often when you need your system to be operating the most.

by: Barret King

POST COMMENT

Wind Generators For The Home - Conserve Dough, Create Your Very Own Electric Power Mile Marker Electric Winch Brief Understanding Of Digital Rights Management Where To Buy A Quality Digital Camera Compare And Buy Processors The Development Of Digital Hearing Aids Nooka The High Class Digital Watch Canon Digital Cameras Make The Best Choice Few Tips When Choosing Digital Printing Insight , The Hard Disk Digital People Choose Digital Signs Over Static Analyzing Your Faulty Air Conditioning Unit Zhejiang Southeast Electric Power Company Limited (900949) - Strategic Analysis Review --- Aarkstore