Automatic Pool Cleaners - Common Problems And A Way To Fix Them
Automatic pool cleaners are a great method to keep the pool neat and clean
. They are very helpful for in-ground pools, especially those that are very massive and would turn out to be nearly not possible to clean yourself.These automatic pool cleaners are a good investment however they must be properly taken care of otherwise they will not work properly and thus the water within the pool will not be as clean as it ought to be.
There is no need to stress; these problems will be simply resolved. Keep on reading this article so as to find out the common issues with automatic pool cleaners and how to deal with them.
The foremost common problems with these things are the low suction of water from the swimming pool. When this happens you should straight away check the strainer basket and also the filter to see if they're not blocked. Blockage takes places when wreckage gets caught throughout the time the water is being filtered. Occasionally it might even be sucking air. When this happens you should check the hose to see if it is properly fitted and there aren't any cracks in it.
Another downside is that the hose might be short or it might get stuck in pool ladders, floats and other obstacles. When this happens simply uncurls the hose and places it in heat water. Cold water sometimes curls plastic hoses.
Occasionally you may even see that the cleaner isn't moving at all and is mounted in one place. The reason could be that wreckage is in the wheels or flappers of the pool cleaner.
Simply make positive that your pool cleaner is in correct shape by doing a routine checkup.
by: Scott Collins