Digital camera using problems and solutions (part 2)
Digital camera using problems and solutions (part 2)
Continue with "Digital camera using problems and solutions (part 1)". Articlesresource from Supply-batteries.co.uk and Batteries-home.com . Author Liushui.
2. image is too dark
(1). Flashbulbs could be blocked finger. Correct hold the camera, don't let fingers blocking flash.
(2). In flash charging according to the shutter release button before. Stop flashing lights until orange.
(3). Not use a flash. According to flash auxiliary pole set flash.
(4). The subject in flash effective outside the scope, will be subject in flash effective range.
(5). Photograph objects is too small and light. Will flash set in auxiliary flash mode or use fixed-point metering modes.
3. image too bright
(1). Flash set in auxiliary flash mode. Will flash mode Settings for auxiliary flash outside of the model.
(2). Things very bright. Pictures Adjust exposure.
4. indoor the pictures of the image color not natural
Reason is the light fixtures affect images. At this time will flash mode Settings for auxiliary flash mode.
5. image contour fuzzy
Reason is the lens is a finger or straps blocked part. Should correctly took camera, don't let a finger or straps to obstruct the lens.
6. flash light non-luminance
(1). Not set flash. According to flash light bounces stem, set flash.
(2). Flash recharging. Stop flashing lights until orange
(3). Photograph objects and bright. Use auxiliary flash mode.
(4) in already set flash, under the situation of lights on the control panel, flash light work abnormalities. Please give to repair.
7. camera not run
(1). The power supply has been opened, press the power button processing power.
(2). The cell polarity equipped wrong. To properly installed batteries.
(3). Battery runs out. Update batteries.
(4). battery temporarily failure. Use it, please keep warm battery; In taking pictures clearance, temporary not used batteries.
(5). Card cover was opened. Closed CARDS cover.
8. the camera automatically shut off
(1) if a digital camera suddenly automatically shut off, you should think of battery power is insufficient NIKON MH-64 charger digital camera is a power consumption of large, it because battery power shortages in the closing phenomena often appear. Replace the battery.
(2) if replacement battery later. digital camera or unable to open, and you find camera are hotter, that is because you continuously use camera for a long time, cause camera overheating and automatic shutdown. Stop using, such as it cools before use.
9. press the shutter release button, not take photos
(1). Just take pictures of the photos are written into the SmartMedia card, now let go the shutter release button, wait for the green lights and stop flashing, LCD display disappears.
(2). SmartMedia card is full. Replace SmartMedia card, extinguish don't pictures or will all photos data transfer to personal computers after erasing.
(3). Are taking pictures or writing when SmartMedia card battery runs out. Update the battery and restart photographed.
(4). pictures content is not in the camera and effective work scope or automatic gathered difficult to lock. Consult standard mode and nearly clap the effective working range pattern or with reference to auto-focusing parts.
A To Z Of Electric Tankless Water Heaters Delivery Of Blood And Plasma Vital During Wartime How To Choose A Portable Air Conditioner? Money Saving Tips While Buying Portable Air Conditioners Understanding The Concept Indoor Air Conditioners Future Possibilities For Texas Electricity Bajaj Processor Best Fit To Your Kitchen Electric Fencing and its role in the spread of Tuberculosis in Camelids Room Air Conditioning An Overview Aluminum Fence For Classy Look And Less Labor Boost Your Business by Using Digital Signage A Brief History of Digital Art Food Processor Recipes: Vegetable Cream Soup