Do It Yourself - Build A Still
Alcoholic beverages are drinks that contain ethanol and are grouped into beers
, wines and spirits. Individuals intake alcohol for many different motives. Of evidently you have responsible drinkers but there are some who just drink it to change the way they feel. A lot of people drink it to make an image like looking grown-up. There are others who intake it because they are influenced into doing so or they want to fit in. Some intake it out of simple curiosity while other people intake it as a way to handle their problems. For whatever reason, we cannot deny the fact that alcohol is valued, desired and sometimes causes an addiction. In fact some persons treasure alcohol so much that they want to create their own. This is where a still comes in practical. A still is a device that is used to distill alcoholic drinks. The directions below will guide you into creating your own still if you are interested in creating your own beverages. There are many variations in which they can be made but this is one of the easiest models.
Materials Required:
4-gallon copper boiler
2 x 36 pipe
1 x 24 copper tubing
Solder (lead free)
Stainless steel milk tin
1 x 11/2 reducing coupler
1 x 2 reducing coupler
3 nipple
1 x 2 nipple
1 elbow
Copper coils
Spigot faucet
Large copper tub
1 copper elbow pipe
New bucket
Piece of garden hose
Airlock
Rubber stopper
Connecting ring (to join boiler and 2 pipe)
Silicon
Mixture to be fermented
Yeast
Cold water
Tools Necessary:
Glass thermometer
Solder gun
Electric heater
Drill
Instructions:
1.Use saw to cut copper boiler in two.
2.Put copper sheet face up on work table. Put half the copper boiler on top.
3.Cut a piece of sheeting slightly bigger than the cut boiler.
4.Solder the sheet to the boiler using solder gun.
5.Place the boiler flat side down and cut 2 hole in the top.
6.Use solder gun and solder the connecting ring over the hole.
7.Use drill to make a hole in the top of the 1 1/2 elbow connector.
8.Solder 2 pipe to the connecting ring.
9.Solder the elbow connector to the top of the pipe using 1 reducing coupler.
10.Solder 3 nipple in place. Place the glass thermometer in the nipple and fasten with silicon.
11.Solder 1 reducing coupler to the opposite end of the pipe.
12.Solder 1 length of pipe to the coupler.
13.Solder 1 elbow joint to the pipe-end. The other end of the elbow should point downward then solder the smaller nipple to it.
14.Solder the nipple to coiled copper tubing.
15.Put the large copper tub below the coils so that they rest in the tub bottom.
16.Cut a hole in the metal container so that the tubing join with it and solder into position.
17.Place electric heater underneath the boiler.
18.Put the mixture to be fermented into the new bucket.
19.Add yeast and cover tightly.
20.Cut a hole in the top of the container to fit rubber stopper.
21.Put the rubber stopper in the hole then attach airlock. You are now ready to start distillation.
22.Fill the tub with cold water and siphon the fermented mixture into the boiler.
23.Turn on the heat.
25.Put a clean container at the end of the spigot then open the spigot.
Tip:
There may be laws governing the use of stills in your country so before you go ahead and build or use one, find out what they are.
by: sadie.backhurst
Shift for oneself Your Finances & Take Bankroll b reverse in Put down of Your Living Do It Yourself Wind Turbine - Green Living Kit Protect Yourself With Reverse Phone Searches Don't Self-Medicate if You are Pregnant Get Yourself A Good Job With The Easiest Bachelors Degree Learn How To Block Negative Thinking And Use Positive Self Talk Lace Front Hair Wigs - A Great Way to Give Yourself a Natural Look How To Develop Self Esteem - The 5 Revolutionary Secrets To Turbo Charge Your Success What Are The Favorite Self Defense Products-the Top Three What Is The Definition Of Self-esteem? Cargo Shorts For Women – Comfy yourself in Fall Season! Considering Camping? Pamper Yourself With Thai Massage In Northern Va