The receiving dry packs untainted is let to pass in through the in-feed Turn Table
with duly steered on the shifting delrin flat conveyor belt at the necessary rate of speed needed for the suitable and dynamic feeding. There are two different heads build-up on machine crest plate in the very same line-up for filling machines. When a pack reaches to the first filling position, it will be kept in control without moving by the pneumatic bottle holder.
Instantaneously the pack will be will be sensed by the pack sensor the minute after the sensor gets signals from magnetic sensor clutch begins to spin that is fixed on auger shaft. The powder filler machine will fill-in the automated quantity of powder product in to the pack through auger. At this juncture, the rotation time is until that time saved in an automated control unit. When the first pack is filled with this method, the pneumatic piston will move backwards and discharge the first pack. This pack will be placed on the conveyor belt and be moved away for further processing. It is different from water filling machine or oil filling machine.
On the same time when the first pack is moved on, the machine picks up an empty pack and makes it move along with the filled pack. Then in the second filling, the full old process of filling will be repeated but for one small change. The second pack will be filled this time while the first pack keeps moving more for next function. The most important benefit of this mechanism is that the package holding system is straightaway linked with Auger rotation. So, what happens is that till the pack gets packed with the powder product as indicated, the value pneumatic system will never leave any pack unfilled.
