Only Two Percent Of Qualified Energy-saving Lamps Actually Luantie Logo For Energy Efficiency -

, released by the Bureau of Industry and Commerce

, Foshan regional sales of compact type and high-power compact

Electronic

Energy Saving Lamp

Etc. Category 5

Light Sources

Product quality monitoring report. Among them, the family frequently used the following e-25W energy saving lamp (compact) the failure rate of 80%, while the 25W-60W electronic energy-saving lamp (compact high-power) the highest failure rate, reaching 88%. Substandard goods mainly low-quality cheap products.


The highest failure rate of harmonic index


Learned that the monitoring of random compact and high power compact electronic energy-saving lamps,

Fluorescent

,

High pressure

Sodium lamp

And

Metal Halide Lamp

The Category 5 of 50 batches of goods, qualified 19th batch, the total pass rate of 38%. Pass rate is the lowest electronic energy saving lamps, passing rate was only 2 percent. Double-capped fluorescent lamps, high pressure sodium and other products for industrial use, their quality is better.


Monitoring results show that snow Wright,

Foshan Lighting

, Osram and other authentic quality name brand remained relatively stable level, substandard, low quality goods mainly in low-cost goods. Monitoring data from the point of view, involves

Security

Nature of the "interchangeability" (Metal

Lamp holder

Size) and "Prevention of electric shock", reflecting the performance and service life of the lamp power, harmonic current limits and other indicators of more than passing rate Liucheng.


It is noteworthy that "harmonic current limits," the highest failure rate items, up 79.4%. Municipal Quality Supervision and Testing Center Measurement

Project

Master Zhang Lanfen, said many smaller domestic companies are in the indicators failed. Since 2003, the state forced harmonic detection test items included, manufacturers lack of understanding of the harmonics.

Consumption

Project in the use of the unqualified products can intuitively feel

TV

,

Cooker

Etc.

Electrical

Product appears to be interference, such as television snow strobe.


Measured less than 17W Nominal 36W


According to reports, limit the value of energy efficiency, luminous maintenance rate, lamp power and the initial luminous efficiency / flux is a direct reflection of energy saving products and product key performance indicators using the results. The indicators of substandard goods will cause energy

Lamp

During the early use of black, lighting was reduced, shortened life, and some can not use just a few hundred hours, and manifests itself in not saving energy, saving money is not the phenomenon section.


The monitoring shows that the "light power" concentrated in the energy-saving lamp failure, the individual failure rate of 70.6%. The past, only limited power ceiling of the old standards, from 2002 also made a lower limit on the power requirements. From this sample results, the measured power and the nominal value were quite different. Nanhai District Shibang Lighting Factory production of energy saving lamps, the nominal value of 36W, measured only 16.9W, less than 50% of the nominal value. Other brands of power deviation though not the so outrageous, but it did not meet standards . "Power standard large mainly due to public misunderstanding in this respect there is that the power the bigger the better, but for business also homeopathic." Foshan Snow Light Optoelectronics

Technology

Co., Ltd. Marketing Department official said.


Energy efficiency

Logo

Side, only nine products

Box

Energy efficiency rating is marked with identification, including two marked the "Day" word certification logo, while the rest of the energy efficiency level of identification products are not standardized, and some even borrowed

Air conditioning

Identification device on the energy efficiency rating, while others are self energy efficiency rating. Issued under the Municipal Government "issued to promote green lighting project, Foshan City, the program of work notice" on the market access conditions for energy-saving lamp provides product packaging must indicate the energy efficiency rating. Through this monitoring showed that most of the product packaging did not identify the energy efficiency rating.


Chita D


How to pick high-quality energy-saving lamps


1. Packaging intact, high brand awareness; 2. As far as big shopping centers or large

Supermarket

Purchase; 3. By observing the packaging identifies the product standards and product express quality indicators, as far as possible from the logo on the selection of product standards rather complete, enterprises, our products express the energy efficiency limit level higher energy-saving electric light source products, especially marked : CQC quality certification, well-known trademarks, famous trademarks,

Guangdong Province

Brand, brand-name products in China, China Energy Conservation Certification, the state exempt products.





by: gaga

POST COMMENT

Oaks Healthy Students Start Another Healthy Hot Air - Energy Saving Air-conditioning, Oaks Air Todays Solar Considerations Save On Home Energy - Home Windmill Energy Save On Home Energy - Saving Electricity At Home Energy Efficiency Upgrades Will Lead The Rams 6.1 Air Conditioning Prices Watershed - Heat Pump, Air Peter Lindemann Save On Home Energy - How To Save Energy Review How To Make A Solar Panel - DIY Tips Things To Be Mindful Of When Searching For New Caravans Learn New Lesson of Drive with Maruti Suzuki Zen Estilo Led Applications In Medical Equipment And New Advances - China Caustic Soda Solid Increase Cosmetic Treatment New Patients Shuaikang First To Launch New Smart Anti-electric Wall Heater - Shuaikang, Anti-electric Wall Heater Investment Resolutions For The New Year