 - Automotive Repair And Maintenance Industry%5D&p%5Burl%5D=https://www.yloan.com/Oudebasi-Nm-Features-And-Instructions-iv-Automotive-Repair-And-Maintenance-Industry-t1788829.html&p%5Bimages%5D%5B0%5D=http://www.yloan.com/megaxpics/Auto/london-1128803__340.jpg){kind=link}
%20-%20Automotive%20Repair%20And%20Maintenance%20Industry---For%20driving%20the%20car%20more%20than%206%20months,%20first%20Polishing%20Machine%20Polishing;%20then,%20will%20){kind=link}
Oudebasi Nm Features And Instructions (iv) - Automotive Repair And Maintenance Industry
For driving the car more than 6 months, first Polishing Machine Polishing; then
, will "highlight finish grinding paste" evenly coated with a polishing paper towels on the paint, then polishing paper towel Waxing machine Under sponge, polishing brightness enhancement; Finally, a new polishing pad in polisher sponge tissue beneath the "bright finish grinding paste" to remove the residue.(2) less than 6 months for driving new cars, only for waxing machine steps on the line.
(3) Note: after polishing may not touch the paint. Nano wax immediately with paint for construction.
3, nano wax works (1) would nano wax polishing wipes to paper towels, and then circle the way to quickly smear the paint evenly.
 - Automotive Repair And Maintenance Industry%5D&p%5Burl%5D=https://www.yloan.com/Oudebasi-Nm-Features-And-Instructions-iv-Automotive-Repair-And-Maintenance-Industry-t1788829.html&p%5Bimages%5D%5B0%5D=http://www.yloan.com/megaxpics/Auto/london-1128803__340.jpg){kind=link}
(2) car roof construction sequence should start, then the trunk, then on both sides, and finally the front engine cover. Each completed painting an area about waxing machine polishing with a new polishing towel.
(3) construction temperature: +5 ~ +25 . (4) construction environment: plant or shade. Construction shall not direct sunlight.
4, drying Nano wax construction has been completed, to drive the truck to the sun, the higher the temperature the better, summer insolation can. Can also be in the workshop will finish with a hair dryer heat to speed up the reaction of nano-particles.
Construction finished an hour later, Nano finish is complete. If the temperature is low, the time may be longer, such as two hours. Then you can test the effect of nano-paint: the paint will pour clean water, the water will quickly drop shaped pearl.
5, the advantages (1) nano-coating paint is very strong, the paint and any foreign matter to isolate, to maintain long-lasting bright paint.
(2) easy to clean: insect carcasses and droppings can be easily removed? With a sponge soaking can. Foreign matter does not directly adhere to paint on, but not corrosive paint.
(3) self-cleaning nature: rain, dust, snow, etc. will quickly fall from the paint on.
(4) washing of the Revolution: car wash actually become so easy. If you have a high-pressure water gun, the paint can be water washed again, and then drive the truck to the road, when the rate of more than 60 km / hour, the paint will be all the water gone with the wind, without any residues , finish will be bright as new! After washing or use pumps to remove residual water, will get the same results. If there is no gun, there is a bucket of water and a sponge is enough: the sponge soaking, clean the car again, and then rinse with clear water, go ride!
(5) paint never hurt: At present, both hand-washing, or washing machine will scratch the paint. With a chamois or towel in the residual water in the process of paint, the paint will stay clear of scratches. However, nano paint used, due to no Cache, your paint will never be harmed.
6, Maintenance of nano-paint
No longer have any protection in the paint on the coating agent, such as: wax, water wax, glazed agent, paint the surface of nano does not require any extra cover. All of the cover will affect the effect of nano-paint. If he has such a cover, use alcohol to wipe the paint, remove them, will return to the original effect of nano-paint!
by: gaga