Process To Install A Sliding Window Air Conditioning
The sliding window air conditioners are mainly used in the small apartments
. These consume much less electricity as compared to the other units. These are the best options for achieving cooling in a small area having one or two rooms. You have a freedom on installing individual units in each rooms thus providing opportunity to individuals occupying that room to adjust temperature as per their preferences.
People usually think that the air conditioner installation needs some great expertise, but in reality it is much easy, more so in the case of sliding ACs.
Precautions
The window ACs are bulky so you should lift them firmly but carefully without exerting any pressure on its cooling parts which could cause you injury. Materials and few tools you may need during the installation of air conditioner:
* A screwdriver
* A support arc
* A level
* Few Wood screws
* Some foam weather stripping
Step 1 - finalize the window
You will have to choose a window with an electrical socket nearby in order to connect the air conditioner unitproperly. Remove any furniture or obstacles near the window which could impede air flow.
Step 2 - To ensure stability
You must thoroughly check the window sill to see if it will act as a stable base for air conditioner unit. You will have to replace it if it is cracked or corrupt before you proceed with installation of the unit.
Step 3 - Install the brackets
Now install the metal brackets use to support the AC at a level which is set for it. These brackets need to be nailed at the center.
Step 4 - raising the AC unit
You will have to gently raise the unit and slide the same in support brackets.
Step 5 - Attach the foam strip
Just mark a point where the unit hits the window. Now raise the window and attach the foam strip all along the line properly. If required, just attach the extensions on the side wall by using the wood screws.
If necessary, attach the extensions on the side wall using wood screws.
Step 6 - Perform application blocking
Perform application blocking up o the point where air conditioner comes in contact with window. This step will ensure proper sealing and would prevent any cold air from escaping.