Quickly Install And Easily Get Started On Your Huawei E960 Wireless Gateway
The unlocked Huawei E960 supports HSDPA/WCDMA 2100
, GSM/GPRS/EDGE 1900/1800/900/850, and network auto-switch. With the E960, you can experience wireless gateway and USB modem at any time and any place.
Share:
Outlook of the Huawei E960 3G Router
1. Phone Cable
2. Ethernet Cable
3. Charger/USB Cable
4. Pedestal
5. Network mode indicator
6. Signal strength indicator
7. ON/OFF key
8. WLAN indicator
9. Power Indicator
Easy switch between Power adapter mode and USB Cable mode
When connected with the power adapter. Huawei E960 Wireless Gateway functions as a wireless gateway.When connected unlocked E960 to the PC with a USB data cable, the Huawei E960 Wireless Gateway functions as a USB modem.
How to use the unlocked E960 quickly and easily.
Step 1: Insert the SIM card
Attention: When you insert or remove the SIM card, disconnect the power adapter.
Step 2: Connect the power adapter
Step 3: Connect it to PC
Step 4: Connect to a telephone
Step 5: Place the Huawei E960 3G Router and make a call
By default, the unlocked Huawei E960 dials up to access the Internet
as required. You can directly use the network
Services such as web browsing, receiving or
Sending emails.
If you need to configure the WLAN or other Gateway-related parameters, you need to Access gateway management page (http//192.168.1.1)
Under the USB modem mode, you can use functions such as voice service, wireless accessing the Internet. However, the Ethernet connection and WLAN cannot be used.
The process of starting the USB mode is similar to the Power adapter mode.
Insert the SIM card into Huawei E960 3G Router
Connect the unlocked Huawei E960 and PC with a compatible USB data cable
The system will automatically recognize the new hardware, and displays it.
The mobile partner installation program of the Huawei E960 3G Router starts automatically. After the successful installation, the management program starts automatically.
How to set up WIFI Network on your unlocked Huawei E960
Step 1: In the address field on your internet browser, type http://192.168.1.1/
Step 2: Type "admin" into the password box and click on the "login" button
Step 3: Select " Advanced settings"
Step 4: Select the " WLAN Enable" icon from screen
Step 5: Select " Enabled" and press "Apply" Button
Step 6: Wait until the device has saved the changed value and press "continue" button
Share:
How to set up WIFI security on your Huawei E960 Wireless Gateway
Step 1: In the address field on your internet browser, type http://192.168.1.1/
Step 2: Type "admin" into the password box and click the "login" button
Step 3: Select the "Quick setup"
Step 4: Click on the "next"
Step 5: Click on the "next" button (do not change the "configure PPP profile setting" )
Step 6: In the SSID field enter the name for your wireless network.
Step 7: Select " enabled " then click " next"
Step 8: Click "next"
Step 9: Change the encryption mode from " No Encryption" to "WPA-PSK"
Step 10: Enter your password in the box marked " WPA pre shared key" the click "next"
Step 11. Click "Finish"
Step 12: Press "continue"
How to access WIFI with Huawei E960 3G Router
Click Start; choose "Control Panel" then Network and Internet Connections then Network Connections.
Look for your Wireless Network Connection
1 Right click and select View Available Wireless Networks
2 Select the network SSID/Name and click Connect. You will be prompted to enter your Password/WIFI Security Key.
3 Close any open windows, and open your Internet web browser
4 Remove gray Ethernet cable.
by: modem3g