Welcome to YLOAN.COM
yloan.com » misc » Something about LED lamp
Gadgets and Gizmos misc Design Bankruptcy Licenses performance choices memorabilia bargain carriage tour medical insurance data

Something about LED lamp

Something about LED lamp

Something about LED lamp

An LED lamp (LED lightbulb) is a solid-state lamp that uses light-emitting diodes (LEDs) as the source of light. The LEDs involved may be conventional semiconductor light-emitting diodes, to organic LEDs (OLED), or polymer light-emitting diodes (PLED) devices, although OLED and PLED technologies are not commercially available in 2010. where to buy cheap LED Strip? Lightereryday is a good choice.

Since the light output of individual light-emitting diodes is small compared to incandescent and compact fluorescent lamps, multiple diodes are often used together. In recent years, as diode technology has improved, high power light-emitting diodes with higher lumen output are making it possible to replace other lamps with LED lamps. One high power LED chip used in some commercial LED lights can emit 7,527 lumens while using only 100 watts. LED lamps can be made interchangeable with other types of lamps.

Diodes use direct current (DC) electrical power, so LED lamps must also include internal circuits to operate from standard AC voltage. LEDs are damaged by being run at higher temperatures, so LED lamps typically include heat management elements such as heat sinks and cooling fins. LED lamps offer long service life and high energy efficiency, but initial costs are higher than those of fluorescent lamps.

General purpose lighting needs white light. LEDs emit light in a very small band of wavelengths, emitting strongly colored light. The color is characteristic of the energy bandgap of the semiconductor material used to make the LED. To emit white light from LEDs requires either mixing light from red, green, and blue LEDs, or using a phosphor to convert some of the light to other colors. recommend directory: 4 Keys RGB RF Controller.

The first method (RGB-LEDs) uses multiple LED chips each emitting a different wavelength in close proximity, to form the broad white light spectrum. The advantage of this method is that the intensity of each LED can be adjusted to "tune" the character of the light emitted. The major disadvantage is high production cost.

The second method, phosphor converted LEDs (pcLEDs) uses one short wavelength LED (usually blue or ultraviolet) in combination with a phosphor, which absorbs a portion of the blue light and emits a broader spectrum of white light. (The mechanism is similar to the way a fluorescent lamp emits white light from a UV-illuminated phosphor.) The major advantage here is the low production cost, and high CRI (color rendering index), while the disadvantage is the inability to dynamically change the character of the light and the fact that phosphor conversion reduces the efficiency of the device. The low cost and adequate performance makes it the most widely used technology for general lighting today.

A single LED is a low-voltage solid state device and cannot be directly operated on standard AC current without some circuitry to control the voltage applied and the current flow through the lamp. A series diode and resistor could be used to control the voltage polarity and to limit the current, but this is inefficient since most of the applied voltage would be dropped as wasted heat in the resistor. A single series string of LEDs would minimize dropped-voltage losses, but one LED failure could extinguish the whole string. Paralleled strings increase reliability by providing redundancy. In practice, three strings or more are usually used. To be useful for illumination for home or work spaces, a number of LEDs must be placed close together in a lamp to combine their illuminating effects. This is because individual LEDs emit only a fraction of the light of traditional light sources. When using the color-mixing method, a uniform color distribution can be difficult to achieve, while the arrangement of white LEDs is not critical for color balance. Further, degradation of different LEDs at various times in a color-mixed lamp can lead to an uneven color output. LED lamps usually consist of clusters of LEDs in a housing with both driver electronics, a heat sink and optics. recommend directory: 3528 SMD Flexible Strip with waterproof 5 Meter 150 LED Strip.
The Gorilla Blue Ridge Pioneer Peak Wooden Swing Set Playground System Seeking at Asics 2150 sneakers MSMM2Fusion A detailed look insde the biz in a box Getting Rich With Low Level Crafting Materials How to Deal With a Death Knight How to Keep a Mage From Dominating in PvP How to PvP Better as a Druid Only Hints On Burberry Outlet The Perfect Pair of Sandals is Out There, Your Guide to Finding Them Why Legitimate Surveys Is The Best Photo Frames Pasting Memories on Finest Tapestry Taking Down a Resto Druid Getting To Know Legitimate Surveys
print
www.yloan.com guest:  register | login | search IP(216.73.216.142) California / Anaheim Processed in 0.017548 second(s), 7 queries , Gzip enabled , discuz 5.5 through PHP 8.3.9 , debug code: 15 , 4277, 85,
Something about LED lamp Anaheim