Steps In Installing Your Own Ceramic Tiles
If you think you will need a truckload of equipment and several contractors and handymen
so that you can get ceramic tile installation in Naples, or replace your old kitchen tile or have your ceramic tile repair in Naples, Fl. , then you are in for the shock of your life. Installing new ceramic tiles is easy with modern and fast-setting mastics, sealants, and grouts.
When you plan on engaging yourself in a project such as
tile installation in Collier County,
tile removal in Naples, FL, or replacing
marble tile in Collier County, the first thing you should check is if you have the necessary tools to do the job and if you have the time to devote on the project. Dont worry, most of the tools youll need are readily available in your local hardware and home depot store, and you can always ask for assistance if you are having a hard time figuring out which items/tools to purchase. As for the time consideration, just make sure that once you begin your project, you have a few hours each day to devote to finishing the job. If you have several consecutive days off from work that would be even better!
First youll need a hammer, level, chalk line, saber saw with carbide blade, rubber gloves, tile mastic and grout sealer, your edging cap and two outside corner edge caps for ceramic tile, your paint stirring stick, and of course your new tiles. You can also rent or buy a grooved trowel, tile nippers, tile cutter, and rubber squeegee.
Second, when youve completed all the necessary tools and materials for your project, next thing to do is to prepare your canvassyour counter surface, or the surface of whichever area you are going to work on or install the tiles. Inspect the surface of the wall, counter, or floor where you will put the tiles. They have to be smooth, clean, and free of any loose plaster, dust, or paint peelings.
Third, start at one specific area, usually it is best to go from edge to edge, left to right especially when you are working on a kitchen counter. This way, your workflow will be more organized. Using your level, draw a vertical line from the outside edge of the tub up as high as you want the tile on the wall. Check the tub for level: If one side is higher or lower by more than 1/8 inch, adjust the starter row of tiles.
Next, spread as much mastic along the wall of the tub as you'll be able to cover with tiles in a half hour. You can then place the first row of tiles, pushing each one slightly with a twisting motion. As you progress, spread more mastic as needed. Leave a 1/8-inch gap between the tub and the first row of tiles.
Finally, grout the tiles when the mastic has completely dried. You can use a blunt stick or grout applicator to force the grout in between the tiles. Remember to use gloves when applying the grout.
by: nathanhilson
Why Choose Porcelain Floor Tiles? Company Overview Report On Topps Tiles Plc - Company Capsule Des Conseils Utiles Pour tre En Mesure De Recherche Pour Les Chaussures De Jogging Could How Carpet Tiles Can Benefit You. Innovative Digital Tiles Weather Proof Sri Tiles Why You Need To Invest In Decra Roofing Tiles Chaussures Tendance: Ou Peut-tre Utiles? Choosing The Perfect Kitchen Tiles. Architectural Tiles Replace Your Kitchen Flooring With Stunning Natural Stone Floor Tiles. Carpet Tiles Are One Of The Most Efficient Ranges Of Flooring Now Available On The Market. Woven Geotextile - Pp Woven Geotextiles Manufacturer & Exporter