How To Install Solar Panels - Correct Information And Procedure
We have been experiencing onset of climate change lately and we need to save energy in the best way that we can
. On order for us to be successful with energy saving, solar panels can be of great help. Here is how to install solar panels with correct information and procedure to follow:
There are many kinds of solar panels but the most popular is photovoltaic panel which is very accessible to use for installation and can be used for any kinds of roof.
We call the easiest method as flashed in. This is very simple because you do not need to reconstruct your roof if you intend to remove the panel. Simply position it carefully by flashing in to the roof you will find any hard time.
There are some owners that would like to flash in their solar panels while constructing the roof. This could be a good idea since you will not have to worry with any leaks. Through it could be properly mounted on the roof.
Another advantage of installing the panels together with roofing method, the measurement will be accurate and no worries of errors especially when it comes to drilling.
In installing the panels, most companies would first align the part of the panel called "mounts" on top of the rafters then, using a pilot bit; the installers would pre-drill the rafters to avoid splitting them during the installation process.
Once that is in place the mounts are then secured using the stainless steel lag bolts. Once bolted, metals flashings are placed over the mounts. The layer of the roof in the area where the panel is installed is hot-mopped around the mops to prevent leaks. The metal rails are then secured using the stainless steel bolts 3/8' in size.
Lastly, install the solar panels carefully in an array.
Finally, the panels are connected to the inverter by running the conduit.
This process is easy, non-tedious and clean, these are the simple steps on how to install solar panels. Homeowners can then use their green energy in no-time.