Make Your Own Solar Panel System without any Difficulty
Make Your Own Solar Panel System without any Difficulty
To make your own solar panel system it can be done without much difficulty if you know the task perfectly. Building your own solar panel is also very economical. You can make your own solar system for under $200 instead of having to pay thousands of dollars for a pre-constructed system. You should now know what exactly you require in order to build your own solar system.
The sun gives out an adequate amount of solar energy of which only a little proportion of its total power potential is used to produce electricity. Solar panels are built to capture the sun solar energy and turn this into electricity. This electricity can be used to power-up your home.
Photovoltaic or PV cells are used to operate solar panel. Formerly, having the solar panel at home was a very costly affair. So only very few people who had enough money had got it installed in their home. Solar panels can now be built at a very reasonable price at home by you.
Materials required:
PV or photovoltaic cells:
These cells absorb the sunlight to produce electrical energy. In order to make your own solar panel these cells are the major expensive component. However, if you get your hands on a reliable "do it yourself" solar system guide you can probably find a way to get these things at a discounted or economical price.
Plywood and glass:
You will fix your solar cells to this plywood and glass and it will be used to cover your cells as a form of protection. This glass will also make your solar energy system, in general, much easier to maintain. However you need to evade using "reflective" glass.
Silicone or Solder and copper wire:
Silicone will aid to keep your cells in position and your wiring can be firmly connected with the use of solder. To connect any and all electrical lines throughout your solar power system copper wire will be used. The wire will also help to keep your cells connected properly which in turn will make your solar panel more efficient and cut down your home electricity bills drastically.
Anti-UV coating:
When you make your own solar panel it is very cheap and economical. As the solar system is exposed to sunlight constantly, the plywood you use might get destroyed. To protect all of your components used in the solar panel anti-UV coating is essential.