Most flag poles purchased from suppliers today usually include a flagpole kit
. Kits should include the flagpole shaft, gold ball ornament, aluminum flash collars, retainer rings and a few other parts including the foundation or ground sleeve.
Of the different flash collars, trumpet collars are generally used with flag poles where a shoe base is welded to the bottom. However, these collars can be used on standard-in-ground mounted type poles if a higher profile is desired. These flash collars are usually supplied in a standard wall thickness of .060 inches. Contact your flagpole supplier for more detailed information.
Fiberglass has been used for the production of flagpoles and part for years. It has proven itself to be a cost-effective solution to those seeking ways to save on poles and smaller parts. Items produced from fiberglass do not corrode or rust, thus making such products pretty much free of maintenance. Fiberglass is also used for the production of collars. Aluminum flash collars are supplied with fiberglass type flagpoles with specific butt diameters.
The external halyard system has generally been the longest existing flag pole halyard system in existence. It is very basic and least expensive. During the last decades the internal halyard has made its introduction. This system is offered with the Colonial V-Cleat, cam cleat and winch with removable flag pole handle. The patented V-Cleat is the latest in halyard technology.
Like any other construction, flag poles also require a solid footing or foundation. That which is defined as a "ground sleeve" is what is used to achieve a solid foundation for flag poles. These sleeves are produced from galvanized metal and PVC. Galvanized metal is applied for poles reaching 20 ft and higher where PVC is commonly used for smaller sized poles. Different rules apply to the different sizes. As mentioned above, a ground sleeve is included in the flagpole kit.