If you have hot tubs in your home, you may have put off cleaning these systems
. It is not always the easiest option, but if you wish to avoid the need for a new hot tub installation, you will dedicate a few hours every few months to the cleansing of these systems. Hot tub repair needs should be tackled right away since they can worsen over time or cause the entire system to stop working properly.
The following tips can help you to avoid hot tub installation of a new tub and will give you the clean, refreshing feeling you are after.
- Plan to clean the spa at least every three to four months thoroughly, depending on how frequently you use it.
- Draining the spa is necessary any time you clean it. Most have a plug system to removing water. Do purchase a simple pump to help you to empty the system faster.
- You will need to use a heavy-duty cleanser to clean the inside of the spa. It is best to use only products that are recommended by your manufacturer. In most cases, the degreaser type products work best (when approved by your manufacturer to use on the hot tubs.)
- Once you have washed out the inside using a soft brush or towel, you will need to ensure you rinse out the tub. These products may actually harm the working mechanics of the system otherwise.
- Add the necessary start up chemicals to your spa when you get your system back up and running.
Hot tubs do not require a lot of hot tub repair and cleaning. If you have avoided the cleaning, you may have to have a hot tub installation tech help you to get the system back in shape.