Want To Build Your Own Fence? Easy Options And Tips
Building your own fence is relatively simple, but it must be done properly
. If youre not a natural handyman, its a good idea to get the basic principles right and work realistically based on your skill levels. Your local fencing supplies company will be able to help with providing everything you need.
Planning your fence
Fences need to sit straight and have a clear plumb line along the fence line. (Dont leave this step out. Your measurements only need to be slightly off over the distance of the fence to cause real problems and a lot of extra, unnecessary work.)
Mark off your fence line, and make sure its straight. Are there any obvious issues on the ground where putting posts are likely to be problems? Avoid hard ground, rocks, and areas with difficult access. Site your fence on clear ground where the supports wont require major efforts.
Fencing types and DIY issues
Fencing is usually based on a system of frames and supports with stable footings in the ground.
* Timber fences: Timber fences may be picket style or solid timber. These fences need to be assembled and installed systematically.
* Steel fencing: Steel fences are frame based, usually either pre-made pieces or steel frames with chainwire or mesh.
* Colorbond fences: Single pieces, but big and need to be handled with respect when installing. Its hard to argue with a Colorbond fence when its in the wrong position, so take extra care when siting your fence.
Setting up your fence
Supports are placed first. The average distance between posts for timber fences are 2- 3 metres. For steel fencing, the supports need to relate to the horizontal frame edges.
Dig your supports to guarantee good stability. Try an experimental post first. The support posts should sit absolutely solid, with no movement at all. (If the supports move, they can bring down the fence over time. Just make sure youve got them rock solid.)
When the supports are in place, start with your fence elements. Cross beams are next, joining the supports and providing the backing for timber fences. Steel frames are practically self- explanatory.
The cross beams must be level and sitting straight. If out of place they put strains on the fencing body and the supports. Be patient, and make sure youve got a real text book setup before adding timbers.
The actual fencing materials can now be added. Check every piece to ensure theyre well fitted to the cross beams. They shouldnt move at all.
Important: Dont use any materials which look damaged or weak. These things will need replacing before the rest of the fence anyway, so its better to get it all done properly from the start.
Quality control when installing
Lay the fence systematically from one end to the other. When doing it yourself, you need to keep track of the materials as theyre assembled. Any issues in one part of the fence need to be addressed before doing the rest of the work.
If you need help
Dont make potentially expensive guesses about your fencing installation. Your local fencing contractors will be able to help if you hit a problem.
by: Kim Jones
Tips When Playing Patapon Tips To Winning Minesweeper Quickly Tips To Playing Solitaire Shopping Tips For Girls Cowboy Boots Tips To Avoid And Relieve Eye Tiredness Tips To Find Unique Gifts For Her Increase Height Naturally And Some Great Tips For Increase Height Few Tips When Visiting Philadelphia Top 5 Gre Study Tips Breast Massage Tips And Techniques To Increase Breast Size Top Tips For Building Muscles With Supplements Tips on football betting Four Secret tips to improve your PPC optimization